Cleanable Magnetic Filtration

The patented, compact Micromag Inline magnetic filter can benefit many different industries.

Contaminated fluid enters the inlet port where it is dispersed by the unique tapered radial flow channel. Fluid passes down the outside of the centrally mounted rare earth magnetic core which captures contamination particles along its length, resulting in excellent filtration efficiency.

The Micromag HP/50 has all the same benefits of the standard Micromag but has been developed to suit high pressure (725 max. operating psi) through spindle-coolant applications, where the smallest particles can damage seals, spindles and even reduce the efficiency of the cutting tool.

The Micromag HP/80 follows from the standard Micromag and has all of the same incredible benefits. This unit was developed to suit high pressure (1160 psi max. operating pressure) through spindle coolant applications, where the smallest of particles can damage seal, spindles and even the efficiency of the cutting tool.

Both Micromag HP/50 and HP/80 can be installed anywhere in the fluid delivery system and will ensure that even sub-micron magnetic and para-magnetic particles are removed before they can cause any expensive damage.

MaGFil™ Magnetic Reusable and Cleanable Insert
For bag filter prefiltration of ferrous particles. Removes ferrous particles from liquid flow increasing filter bag life. Compatible with FilClean™ BHQ filter housings. See full features below.

Filtramag+ is a high performance magnetic filter with full stainless steel construction which makes it suitable for use in a variety of industry sectors and applications.

Product Specs & Ordering Info


Micromag Features

  • Sub-micron filtration
  • Large holding capacity
  • High intensity rare earth magnetic material
  • Clear bowl
  • Suitable for all machining applications
  • Environmentally responsible
  • No consumables
Product NumberFlow
Rate
Contamination CapacityMax. Operating pressureTemperature rangeConstruction
MM5/1.0 18 gpm2.2 lbs.174 psi41-122°FSAN housing, aluminum lid
MM10/1.0 26 gpm4.4 lbs.174 psi41-122°FSAN housing, aluminum lid
MM20/1.5 40 gpm8.8 lbs.174 psi41-122°FSAN housing, aluminum lid
MM5/HP/50 NPT18 gpm2.2 lbs.725 psi32-284°FFull aluminum
MM10/HP/50 NPT26 gpm4.4 lbs.725 psi32-284°FFull aluminum
MM20/HP/50 NPT40 gpm8.8 lbs.725 psi32-284°FFull aluminum
MM5/HP/80 NPT18 gpm2.2 lbs.1160 psi32-284°FFull stainless
MM10/HP/80 NPT26 gpm4.4 lbs.1160 psi32-284°FFull stainless
MM20/HP/80 NPT40 gpm8.8 lbs.1160 psi32-284°FFull stainless

Download literature for full specs.

Request a Quote

MaGFil™ Magnetic Inserts

Features:

  • Removes ferrous particles from liquid flow increasing filter bag life.
  • All 304 stainless construction resists wear and damage
  • Fits a variety of Bag Filter Vessels
  • EPDM (Ethylene Propylene Diene M) rubber bumpers to protect fabric bags
  • Less than 5 seconds to clean - remove magnet from stripper sleeve and magnetic particles drop off into waste pan
  • Never loses power
  • Can reduce bag filter usage by 15 to 1. Contaminant and cleaning interval dependent
  • Typical savings of 6:1 to 12:1 are common
  • Multiple magnetic types available: Depending on application, removal strength and dirt holding requirements - Ceramic, Neodymium or Alnico.

Magnet LengthBag Filter SizeBag Filter Dim.
15 in.17" x 16-12"
30 in.27" x 32"
8 in.34" x 8"
14 in.44" x 14"
20 in.85.6" x 21"
20 in.95.6" x 32"
34 in.1282" x 32"

Request a Quote

Magnet Type-->Ceramic
(strong)
Alnico
(stronger)
Neodymium
(strongest)
Gauss on Magnet Tube Surface1200 Gauss1350 Gauss5500 Gauss
Capacity (steel chips) per 4" of magnetic length1 lb1.55 lbs2.45 lbs
Pull Force (for comparison purposes)25 lbs35 lbs125 lbs

Filtramag+ High intensity magnetic filter

Filtramag+ is a high performance magnetic filter with full stainless steel construction which makes it suitable for use in a variety of industry sectors and applications.

  • Patented design
  • Easy installation
  • Unique dual flow technology™ - maximizes collection capability
  • Operates at up to 290psi
  • Removes both magnetic and non-magnetic contamination
  • Minimal pressure drop
  • In-line connections
  • Ideal for use in harsh chemical environments

Product NumberMax Flow RateContamination CapacityMax. Operating pressure
FM1.5+/ANSI66 gpm6.6 lbs.290 psi
FM2.0+/ANSI132 gpm13.2 ls.290 psi

Download literature for full specs.

Request a Quote



Sign up here for notifications regarding MSC Filtration Technologies and subscribe to one of our industry specific newsletters.